DIGGA PD10 Drive Unit - For 76R and 89R Screw-Piles
Product Information
Inquire for Hire Rate
With 8487Nm of torque the DIGGA PD10 is built for heavier jobs. Perfect for 76R piles and capable of installing 89R in softer conditions, it pairs well with 5—8t excavators. This mid-size unit is widely used in small commercial and large domestic projects.
Specifications:
| Machine Size Suitability | Up to 10t | ||||
| Recommended Flow | 85lpm – 115lpm | ||||
| Maximum Torque | 8487Nm | ||||
| Pressure Valve | Optional | ||||
Build Information:
| Overall Length | 854 mm | ||||
| Diameter | 290 mm | ||||
| Weight (Without Frame / Hitch) | 110kg | ||||
| Standard Output Shaft | 75mm Square | ||||
| Energy Control Valve | Not Applicable | ||||
| Case Drain Recommended | Backhoes | ||||
| Maximum Pressure | 240bar at 60lpm | ||||
| Maximum Flow | 115lpm at 130bar | ||||
| Maximum Power (Combined Flow at Pressure) | 25Kw (34hp) | ||||
| Swing Control | Optional | ||||
| Diggalign | Optional | ||||
| Halo Available | Optional | ||||