DIGGA PD3 Drive Unit - For 60R Screw-Piles
Product Information
Inquire for Hire Rate
The DIGGA PD3 offers 3,000Nm of torque at 55rpm with a 60LPM flow rate, providing extra power over the PD2 for tougher soils. Suitable for excavators from 1.5 to 2.5 tonnes, it’s a reliable choice for 60R screw-pile installs where higher torque is needed. This unit bridges the gap between small-scale DIY and professional installations. Inquire for hire rate.
Specifications:
| Machine Size Suitability | Up to 10t | ||||
| Recommended Flow | 85lpm – 115lpm | ||||
| Maximum Torque | 84871Nm | ||||
| Pressure Valve | Optional | ||||
Build Information:
| Overall Length | 854mm | ||||
| Diameter | 290mm | ||||
| Weight (Without Frame / Hitch) | 110kg | ||||
| Standard Output Shaft | 75mm Round | ||||
| Energy Control Valve | Not Applicable | ||||
| Case Drain Recommended | Backhoes | ||||
| Maximum Pressure | 240bar at 60lpm | ||||
| Maximum Flow | 115lpm at 130bar | ||||
| Maximum Power (Combined Flow at Pressure) | 25Kw (34hp) | ||||
| Swing Control | Optional | ||||
| Diggalign | Optional | ||||
| Halo Available | Optional | ||||